I noticed the other day that my greenhouse door wasn’t closing properly. Further investigation revealed some bolts and covers had come loose. Given how often the door has been opened and shut recently with the hot weather I’m not surprised. The greenhouse is slightly different from most in that it is octagonal. However it serves its purpose well. As you can see from the photo the bottom of the door panel had lost a few bolts and these needed to be screwed back in. Unfortunately it was at the hinge side of the door so it was a little awkward and not being able to see both sides at the same time meant I was working ‘blind’ as they say. It took a few attempts but eventually I was able to get the bolt and the nut to connect and screw together tightly.